This app can’t be activated by the Built-in Administrator

Y'all may receive the fault message This app tin can't be activated by the Built-in Administrator when you effort to open certain apps on your Windows 11 or Windows 10 calculator. This mail provides the most acceptable solutions affected PC users can apply to resolve the issue on their device. In some cases, the fault occurs when yous endeavor to open PNG, GIF, JPEG, and PDF files.

This app can't be activated by the Built-in Administrator

When you run across this consequence, depending on the program in question, you'll receive the total error bulletin along the following lines;

Microsoft Visual Studio

Unable to actuate Windows Store app. The activation request failed with error 'This app can't be activated by the Built-in Administrator'.

Run across help for advice on troubleshooting the upshot.

This app can't be activated by the Congenital-in Administrator

If y'all're faced with this outcome, you can try our recommended solutions beneath in no item order and see if that helps to resolve the This app can't exist activated by the Built-in Administrator result that has occurred on your Windows 11/x device.

Run Windows Store Apps Troubleshooter
Run Arrangement File Checker (SFC) scan
Reset Microsoft Store or Clear Windows Shop Enshroud
Change UAC level
Modify User Account Control policy via Group Policy Editor

Permit's take a look at the description of the procedure involved concerning each of the listed solutions.

Before you lot attempt the solutions below, check for updates and install any available bits on your Windows 11/10 PC and see if the error reappears when yous launch the app. On the other hand, if the error started to appear afterwards a recent Windows update, you tin can uninstall the update. Also, make sure that y'all are using an administrator account. You can change a standard account to admin business relationship or simply create a new account with admin privilege. If you want, you can create Local Administrator Business relationship on your PC.

1] Run Windows Store Apps Troubleshooter

Windows Store Apps Troubleshooter-11

As the app in question is a Microsoft Shop app, you can brainstorm troubleshooting to resolve the This app can't exist activated by the Born Administrator issue that has occurred on your Windows 11/10 device by running the Windows Store Apps Troubleshooter and come across if that helps.

To run Windows Shop Apps Troubleshooter on your Windows 11 device, exercise the post-obit:

PrintingWindows fundamental + I to open up Settings app.
Navigate toSystem > Troubleshoot > Other troubleshooters.
Under theOther section, find Windows Shop Apps.
Click Run push button.
Follow on-screen instructions and apply whatsoever recommended fixes.

To run the Windows Store Apps Troubleshooter on your Windows 10 PC, practise the following:

Windows Store Apps Troubleshooter-10

PressWindows key + I to open up Settings app.
Become to Update and Security.
Click theTroubleshooter tab.
Gyre down and click on Windows Store Apps.
Click the Run the troubleshooter button.
Follow on-screen instructions and utilise any recommended fixes.

If this didn't aid, you tin can uninstall and reinstall the Windows Store app in question.

2] Run Organisation File Checker (SFC) scan

Run System File Checker (SFC) scan

This solution requires you lot to run SFC scan on your Windows 11/ten PC and come across if that helps. The native utility will repair any corrupt system file which is a likely culprit to the issue in hand.

3] Reset Microsoft Store or Clear Windows Store Cache

Clear Windows Store Cache

Some affected users reported they were able to resolve the issue in hand by resetting Microsoft Store or clearing Windows Store cache. So, yous can give this a try and see if that works for you lot, otherwise try the side by side solution.

four] Change UAC level

Change UAC level

Due to security setting of newer versions of Windows, certain file types that are opened through Store apps will require UAC (User Account Control) permissions in gild to run, but since the built-in account doesn't have UAC privileges, you'll become the mistake. In this instance, to resolve the issue, yous can change the UAC level on your Windows 11/10 PC.

Effort the next solution if this didn't piece of work for y'all.

5] Modify User Account Control policy via Group Policy Editor

Modify User Account Control policy

This is a two-pace solution which requires you to enable Admin Approval Mode for the Built-in Administrator Account and and so modify the User Interface Privilege Isolation (UIPI) registry key value.

Do the following:

Press Windows primal + R to invoke the Run dialog.
In the Run dialog box type gpedit.msc and hit Enter to open Grouping Policy Editor.
Inside the Local Group Policy Editor, use the left pane to navigate to the path below:

Computer Configuration > Windows Settings > Security Settings > Local Policy > Security Options

Ringlet on the right pane, locate and double-click on User Account Control: Admin Approval Mode for the Built-in Administrator account policy to edit its backdrop.
In the policy window, set the radio button to Enabled.
Click Apply > OK to save the changes.
Exit Grouping Policy Editor.

For Windows xi/10 Home users, you can add Local Group Policy Editor feature and then comport out the instructions as provided in a higher place.

Now, you tin can proceed with the footstep 2 to modify the UIPI registry key value.

Modify UIPI registry key

Since this is a registry operation, it is recommended that y'all support the registry or create a organization restore betoken as necessary precautionary measures. Once done, you can proceed as follows:

Press Windows central + R to invoke the Run dialog.
In the Run dialog box, type regedit and hit Enter to open Registry Editor.
Navigate or jump to the registry key path below:

Reckoner\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\UIPI

At the location on the correct pane, double-click on the (Default) entry to edit its properties.
In the properties dialog, input 0x00000001(1) in the V alue data field.
Click OK or hit Enter to save the modify.
Exit Registry Editor.
Restart PC.

Hope this helps!

Related postal service: Microsoft Edge tin can't exist opened using the built-in administrator account

How do I enable the built-in administrator account?

To enable the built-in Ambassador Account in Windows 11/10 PC, follow these instructions:

Open Command Prompt in elevated mode.
Type net user administrator /active:yes, and then hit Enter.
Look for confirmation.
Restart your computer, and you will have the option to log in using the administrator account.

What is built-in administrator business relationship?

The born administrator account in the Windows operating organization (Os) is the first account created when the operating arrangement is installed. Yous can as well delete the congenital-in Administrator Account in Windows.